Skip to content
See Immersion Canary live at SC26Booth 3947 · Two live tanksRequest a meeting
fluidiQ by Magnalytix

For fluid manufacturers

Connect fluid performance to electrical conditions.

Follow fluid health through qualification, aging studies, and service. Combine continuous electrical measurements with laboratory analysis to evaluate fluid performance.

Talk about fluid validation
Immersion Canary with its fluidiQ-branded sensing card and stainless steel enclosure, shown without a background.

How Immersion Canary helps.

Evaluate fluid performance with continuous measurements that complement laboratory analysis.

Acid number, viscosity, particulates, and oxidation indicators describe the fluid. Immersion Canary complements them with electrical measurements on representative test structures in the same fluid.

Continuous Environmentally Induced Degradation (EID) measurements support qualification and aging comparisons alongside periodic laboratory analysis.

Record readings in your monitoring platform or Aviary to give quality and warranty investigations a shared, timestamped evidence base.

What it monitors

Surface resistance and fluid volume resistivity, measured continuously.

  • Fluid health, continuously

    Surface resistance from 1 MΩ to 1 TΩ across PCB-representative test structures in your dielectric, under a bias you configure, alongside fluid volume resistivity from about 1.5 MΩ·cm to 1.5 TΩ·cm (about 15 kΩ·m to 15 GΩ·m).

  • Measured against your own baseline

    Each tank sets its own baseline when it is commissioned and healthy. Live condition is reported against that baseline, so what you see is change in your environment rather than a generic threshold.

  • In real operating conditions

    Independent heater control simulates the localized heating of high-power components on the test card. Heater duty cycle and test-card temperature are reported alongside the electrical measurement.

  • Into the systems you already run

    A dashboard served by the instrument itself, plus HTTP/JSON REST, Redfish, Modbus/TCP and MQTT for your historian, DCIM, SCADA or alerting stack.

The work behind this

  • Ongoing researchInternal experimental study

    Fluid Oxidation Study

    An ongoing study using Immersion Canary instrumentation to track the electrical behavior of aged and oxidized immersion fluids against controls.

    Data collection is ongoing. No conclusions are stated from this work yet.

  • PublishedIndustry collaboration

    OCP Material Compatibility Workstream

    Through its participation in the OCP Material Compatibility Workstream, fluidiQ by Magnalytix helped build and continues to help maintain the open-source Material Compatibility Database, covering wetted material compatibility across single-phase and two-phase dielectric fluid families.

Where our laboratory work applies to you.

Resources for your application

Talk about fluid validation

Tell us what you are running and we will reply within one business day.

Talk about fluid validation
SC26

Find us on the show floor

Booth 3947

McCormick Place, Chicago. Exhibits November 17–19, 2026, Tue–Wed 10am–6pm · Thu 10am–3pm. Two live tanks running at the booth.

Open the show floor map