Skip to content
See Immersion Canary live at SC26Booth 3947 · Two live tanksRequest a meeting
fluidiQ by Magnalytix

For tank manufacturers

Build fluid health monitoring into your tank.

Give customers a clearer view of fluid health in service, with continuous measurements that support investigation and maintenance after installation.

Discuss tank integration
Immersion Canary with its fluidiQ-branded sensing card and stainless steel enclosure, shown without a background.

How Immersion Canary helps.

Build fluid health monitoring into your tank and give customers a baseline for investigating changes.

Immersion Canary adds continuous measurements of surface resistance and fluid volume resistivity to help customers follow fluid health inside your tank.

Continuous measurements on representative test structures track Environmentally Induced Degradation (EID) in the tank. Record readings in your monitoring platform or Aviary to build a timestamped history for field investigations.

The instrument is designed to live alongside production hardware, with networked data that can fit the operational stack the customer already runs.

What it monitors

Surface resistance and fluid volume resistivity, measured continuously.

  • Fluid health, continuously

    Surface resistance from 1 MΩ to 1 TΩ across PCB-representative test structures in your dielectric, under a bias you configure, alongside fluid volume resistivity from about 1.5 MΩ·cm to 1.5 TΩ·cm (about 15 kΩ·m to 15 GΩ·m).

  • Measured against your own baseline

    Each tank sets its own baseline when it is commissioned and healthy. Live condition is reported against that baseline, so what you see is change in your environment rather than a generic threshold.

  • In real operating conditions

    Independent heater control simulates the localized heating of high-power components on the test card. Heater duty cycle and test-card temperature are reported alongside the electrical measurement.

  • Into the systems you already run

    A dashboard served by the instrument itself, plus HTTP/JSON REST, Redfish, Modbus/TCP and MQTT for your historian, DCIM, SCADA or alerting stack.

The work behind this

  • PublishedIndustry collaboration

    OCP Material Compatibility Workstream

    Through its participation in the OCP Material Compatibility Workstream, fluidiQ by Magnalytix helped build and continues to help maintain the open-source Material Compatibility Database, covering wetted material compatibility across single-phase and two-phase dielectric fluid families.

Where our laboratory work applies to you.

Resources for your application

Discuss tank integration

Tell us what you are running and we will reply within one business day.

Discuss tank integration
SC26

Find us on the show floor

Booth 3947

McCormick Place, Chicago. Exhibits November 17–19, 2026, Tue–Wed 10am–6pm · Thu 10am–3pm. Two live tanks running at the booth.

Open the show floor map